How to Build – Manual Marble Machine Kit no.0

1. Prepare kit components 2. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to smooth out edges. 3. Ball track Carefully cut out the ball track and all couplers. Place the cut out “trash” parts between the ball track and use it as the strut. Then glue all…

How to Build – Electric Marble Machine no.0

1. Prepare kit components 2. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to smooth out edges. 3. Ball track Carefully cut out the ball track and all couplers. Place the cut out “trash” parts between the ball track and use it as the strut. Then glue all…

How to Build – Shield no.5

1. Prepare wooden parts 2. Blueprints All important elements are numbered (blue and white numbers), these numbers determine: which parts should be glued to the proper pillars, platforms and slots. 3. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to smooth out edges. 4. Pillars & Platform Glue…

How to Build – Shield no.4

1. Prepare wooden parts 2. Blueprints All important elements are numbered (blue and white numbers), these numbers determine: which parts should be glued to the proper pillars, platforms and slots. 3. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to smooth out edges. 4. Small Pillars & Platform Glue…

How to Build – Shield no.3

1. Prepare wooden parts 2. Blueprints All important elements are numbered. On the pillars and platforms there are two numbers (blue and white), these numbers determine: which parts should be glued to the proper pillars, platforms and slots. 3. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to…

How to Build – Shield no.2

1. Prepare wooden parts 2. Blueprints All important elements are numbered. On the pillars and platforms there are two numbers (blue and white), these numbers determine: which parts should be glued to the proper pillars, platforms and slots. 3. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to…

How to Build – Shield no.1

1. Prepare wooden parts 2. Blueprints All elements are numbered. Each of the pillars has a number from 1 to 12, from the lowest to the highest. These numbers correspond to the numbers located on the base. On the platforms there are two numbers, these numbers determine which side of the platform should be glued to…

How to Build – Electric Mainboard no.1

1. Prepare wooden parts 2. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to smooth out edges. 3. Base and legs The base consists of three pieces: bottom, middle and smallest top. Glue middle and bottom layers together, shown on the images. Optional: glue legs on the underside…

How to Build – Manual Mainboard no.1

1. Prepare Wooden parts 2. Cutting Carefully cut the small retaining tabs holding the parts in the panels and use sandpaper to smooth out edges. 3. Base The base consists of three pieces: bottom, middle and smallest top. Glue all the layers together, shown on the images. Note the engraved line on the middle layer defines…